Stay Tuned for More Tips & Tricks!
D13SRJ Decoder with NMRA 9 pin jack - Rev. D PC Boards
If you are going to use Surface Mount resistors on the back of the D13SRJ decoder board for LED lighting, the letters and numbers for outputs are reversed.
F marked on the board is actually the yellow back up light wire
R marked on the board is actually the white forward light wire
1 marked on the board is actually the violet F2 output wire
2 marked on the board is actually the green F1 output wire
This ONLY occurs on the Rev. D PC Boards and does not apply to any other decoder.
Easy Start for the NCE Pro Cab Radio
Rick Fortin from the San Francisco area discovered a great way to "kick start" the radio cabs:
1) Hold down the ENTER key while pressing the EMERGENCY STOP button. This will kick start the radio.
2) To turn the radio off, press the EXPN key and then press 1.
Cab Address 49
We have recently discovered that Cab04 or Cab05 Radio Cabs when set to address 49 will cause a system hang-up. Avoid this address.
Remember that the suggested cab addresses are as follows: Pro Cab - 2-17, Intermediate Cabs - 19-47.
|
